| Ratings |
33.8VDC 10A |
| Weight (approx.) |
850g (including 5 separate output cables/connectors) |
| Dimensions (approx.) |
165.6L x 143W x 34.8H mm (main housing only) |
| BMS Functions |
A built-in BMS functions include: over-current, over-voltage, over-temperature, over-discharge, remaining capacity indication, etc. |
| Upper Housing |
Plastic in black |
| Bottom Housing |
Aluminum extrusion in black |
| Software Algorithm |
Sine wave |
| PAS Levels/ Modes |
Eco (Mode 1,2,3); Normal (mode 3,4,5); Power (mode 6,7), Boost (Mode 8); No assistance (Mode 0); Walk Assist; Reverse Walk Assist |
| Operating Temperature |
-20°C to 45°C |
| Storage Temperature/ Humidity |
+0°C to +40°C/humidity <= 65% @25°C |
| Controller IP Rating |
IPx5 |
| Speed Limit |
25 Km / hour |
| Auto Power Shut Down |
After 10 minutes of idle time, the controller shuts down completely |
| On-Bike Charge |
It is not allowed to make a re-charged while battery is still mounted on e-cargo bike. |
| Regeneration Function |
Support 2A re-gen. in braking or downhill cycling |
| Compatible Battery Models |
ibo-R37 & ibo-R45 (via MX216 18-pin connector) |
| Compatible Torque Sensor |
ibo-BBTS1.0 (via EM5 5-pin metal connector Tag #1) |
| Compatible Motor Model |
ibo-09C-33230 (via EM8 8-pin plastic connector Tag#2) |
| Compatible LCD Models |
ibo-C500 (via EM6 6-pin metal connector Tag #3) |
| Compatible Front/Rear LEDs |
to be provided by customers |
| Connector to Rear LED |
2 pcs of tin plated bare wires with Tag #4 |
| Connector to Front LED |
JST 2-pin connector with Tag #5 |
| Standards Compliance |
CE/FCC; ISO13849-1:2015; EN15194:2017 |
